Texas: natural gas refining process results in industry breakthrough
With the help of a Texas A&M University chemical engineering professor, a Dallas-based gas-to-liquids (GTL) energy firm has developed what it labels as the industry’s first commercially viable process for converting natural gas into useable fuels.
The announcement came Tuesday at a press conference held at the Synfuels research and demonstration plant in Bryan. The result could mean millions of barrels of new petroleum products – all produced more efficiently and in an environmentally friendly method.
Expanding on a process conceived by Kenneth R. Hall, a professor in the university’s Artie McFerrin Department of Chemical Engineering and the associate director of the Texas Engineering Experiment Station (TEES), Synfuels International, Inc., has patented a method for refining natural gas that will enable the firm to take advantage of existing natural gas deposits. Prior to this technology, those deposits have remained untapped for a number of reasons, said Ben R. Weber, chairman and CEO of Synfuels International.
Quadrillions of cubic feet of natural gas exist globally, but because of geographical barriers, transportability, undesirable product contents, or non-existing entry points to commercial markets, those deposits lay dormant in areas such as Peruvian jungles or Indonesian islands. In addition, World Banks estimates another 5.3 trillion cubic feet of natural gas is wasted annually by either flaring or being vented, said Thomas R. Rolfe, president of Synfuels International.
“Flaring” occurs when natural gas is inefficiently burned into the atmosphere during the refining process. Currently, an amount equivalent to 25 percent of the United States’ annual gas consumption is lost in this manner, he said. Hall’s process – the result of nearly 10 years of work – will address both of those issues.
Not only will it enable Synfuels to convert natural gas to a clean-burning pipeline or tanker-ready liquid, it will do so in an efficient and environmentally friendly method, which still renders the liquid product competitive with the crude oil market, Weber said.
The breakthrough process, which was developed in cooperation with Texas A&M and TEES, is the result, Weber said, of “a marriage between Texas A&M and entrepreneurship.” And it all began when Hall and his colleagues were attempting to develop a method for disposing of lube oil waste in an environmentally friendly manner. When Hall first proposed the idea of realistically converting existing natural gas into usable petroleum products, Weber said the concept sounded “almost too good to be true.”
However, Texas A&M’s credentials in the area as well as the quality of its researchers were enough to convince Weber the idea was achievable, he said. “During our research and experimentation,” Hall explained, “we saw that it was possible to convert natural gas to acetylene, which could then be converted to ethylene. And the beauty of the formula for the conversion is that every step has been verified by outside experts as both scalable and possible on a commercial level.”
The Synfuels process focuses on efficient high-temperature natural gas conversion into acetylene, which is then converted into ethylene at moderate pressures and temperatures. After the ethylene passes through a catalytic reactor, it is converted into products such as gasoline and jet fuel. Synfuels representatives state the process yields a significantly higher amount of usable products than traditional industry standards.
Utilizing Hall’s process, Synfuels – in an agreement with Aref Energy Holding – intends to develop the world’s first commercially viable GTL plant in Kuwait. The new facility, once completed, will have the capabilities to produce high-octane fuels, which may be used to power any motorized vehicle including aircraft and automobiles, with only the need to flare a small amount of gas to remove nitrogen from the process stream.
“This is undoubtedly the world’s first breakthrough for a gas-to-liquids refinery,” Rolfe said. “By cultivating these untapped resources, we will not only be able provide the world with a cleaner energy solution producing virtually no unwanted bi-products, but we will also be able to stimulate local economies where we have identified these natural resources to be available.
It is truly a new day and we are thrilled to be leading the way. “Synfuels has the opportunity to build hundreds of plants, to make it a cleaner world and to develop natural resources that could never be developed before. A new era in gas-processing technology has been born.”
See more here: tees.tamu.edu
Header image: iStock
Please Donate Below To Support Our Ongoing Work To Defend The Scientific Method
PRINCIPIA SCIENTIFIC INTERNATIONAL, legally registered in the UK as a company 
incorporated for charitable purposes. Head Office: 27 Old Gloucester Street, London WC1N 3AX.Â
Trackback from your site.
Howdy
| #
Already done by Shell over a decade, ago.
“Shell GTL (gas-to-liquids) Fuel is an alternative diesel fuel derived from natural gas, which burns more cleanly than conventional crude oil-based diesel”.
https://www.shell.com/business-customers/commercial-fuels/shell-gtl-fuel.html
Reply
very old white guy
| #
I am supposed to laugh right? Humour right?
Reply
T. C. Clark
| #
Will this tech be made available to Russia? I read that the major western oil companies that operated in Russia modernized the backward Russian oil industry. Will China need to steal the tech or will it just be handed over? In other news, how about that lithium-glass battery…and that aluminum -air battery?
Reply
Howdy
| #
Two dissimilar metals in a lemon. Get enough lemons, you can power a car.
Reply
LongTimeTexan
| #
Will the car be able to pull that many lemons?
Reply
Oldavid
| #
Is this just a silly propaganda joke?
To polymerise methane, ethane, etc. into long chain hydrocarbons is a fairly simple matter requiring only an appropriate catalyst and appropriate conditions of pressure and temperature yielding a by-product of some Hydrogen.
Somebody is taking us all for idiots. Way back in the 1940’s the Fischer-Tropsch Process was synthesising long chain hydrocarbons from coal and steam; a more complex operation.
Reply
Tom
| #
30 years too late. We are on the windmill/solar panel path into the next 100 years.
Reply
LongTimeTexan
| #
After his press conference today where he lied his sorry arse off about the amount of oil the U.S. is pumping, the senile old fool is headed to Texas. So come on Texans, show up by the thousands with your “Let’s Go Brandon” and “Trump 2024” signs and let this feckless clown know what Texans think of him.
Reply
MattH
| #
In New Plymouth, New Zealand, they started turning natural gas into synthetic petroleum in 1987.
https://teara.govt.nz/en/photograph/8935/motunui-synthetic-petrol-plant
Reply